TinyWhoop R3DWhoop Zero Grav Insta360 GO Mount

idea1_4_2_cut.stl = This file is the vertical camera mount. I was having balance issues, but after reviewing the footage, it might've just been the quad eating it's own unsecured antenna.

idea1_3_0_25deg_cut.stl = this is a 25 degree mount for the insta360 go, mounted horizontally. you will get props in the way.

Magnet was just some 12x2mm circular magnets i had... but these are too small for the hole and they're kind of heavy... for the vertical mount, a rubber band or tape works best, and for the horizontal mount... well I guess a magnet can't be helped.

This file was made for the R3DShifters R3DWhoop Zero Grav frame, utilizing the nano camera mount that comes with it.

It was used on my Mobula6 (65mm brushless quad) which has an all in one FC including VTx, Rx and ESCs, so it's a single board. This allows me to mount the camera right on top of the FC.

3mf files are included to seperate out the shell if you wish to modify the design for yourself.

Spread the word that the Insta360 GO is go-to camera for stabilized whoop footage!

Here's a small sample of what you can accomplish straight out of the app!:
https://www.youtube.com/watch?v=JJ-CxDreLJg
No ReelSteady required!