March 7, 2020
Description
Magnetic Stirrer for the 1 L (33.8 Ounce) Sistema Klip It Container.
I like to perform a two step rinsing of my 3d printed parts. The first rinse is with old IPA in the container that comes with Anycubic Wash & Cure Machine. The final rinse is done with cleaner IPA in the 1L Sistema Klip It Container.
Required Materials:
1x 608z ball bearing (8 x 22 x 7 mm)
2x Magnet (8 x 3 mm)
Make sure to glue in the magnets in the correct orientation.
If you cut the basket in half and glue it back together you can keep the basket in with the lid closed.
2020-03-08 - Version 2
I have added a second version that uses the spare ball bearing which came with the Wash & Cure Machine. Just glue the base to the center of the container with some UV resin. The ball bearing and magnet are also glued with UV resin.
Required Materials:
1x 625zz ball bearing (5 x 16 x 5 mm)
2x Magnet (8 x 3 mm)
2020-03-08 - Version 2.1
Increased tolerance of the stirrer to the bottom by 0.5 mm.
2020-03-08 - Version 3
Like V2 but with a 608z ball bearing.
Required Materials:
1x 608z ball bearing (8 x 22 x 7 mm)
2x Magnet (8 x 3 mm)
2020-03-13 - Onshape Link
You can modify my Onshape design to adept it to your ball bearing / magnets.
Just update the following variables in the design:
Bearing_Hole_Diameter
Bearing_InnerRing_Diameter
Bearing_Thickness
Gap_Tolerance
Magnet_Diameter
Magnet_Thickness
License:
Creative Commons - Attribution
Sven_Jakob
