March 8, 2020
Description
Remixed this to have no logo and just the tabs needed on my Ender 3 Pro purchased in December of 2019. Yours may need the second set of tabs, if so, check the originals files.
No built in supports so support is needed. Use "Touching Buildplate" support. I use 10% density.
Must have "print thin walls" enabled as well.
PETG or ABS - PLA will fail eventually so IMHO, dont bother with PLA.
PETG print shown was printed at 240 nozzle temp, 80 bed temp and 40mm print speed.
License:
Creative Commons - Attribution
CB_ATX
