Elephant Utensil Holder / Planter

A modified version of Ryanirv's "Elephant". Altered with an internally sloped surface and extended trunk to act as a drain for liquid.
Print time was 11 hrs and 55 mins at 100% scale for the Ender 3 build platform. Print speed was 40 mm/s, with infill speed at 40 mm/s, infill at 10%, and thickness of top and bottom layers at 1.6 mm. Nozzle diameter was 0.8 mm with perimeter wall thickness at 1.6 mm. It would be necessary to adjust the infill percentage perimeter walls and to make the print watertight. Activated Z-hop to prevent shifted layers as nozzle had a tendency to come in contact with upper layers as part printed.