Slim and Elegant BTT TFT24 V1.1 Touch Screen Extrusion Mount

###This light, elegant and very slim holder for the very popular BIGTREETECH TFT24 V1.1 Touch Screen on any 20x20 or 20x40 aluminium extrusion.

Please check if you have the right version of this screen. There are more 1.1 but they differ a lot!

The screen is fitted on a ball joint so you can adjust the display angle it as you please and lock it by turning the ring.

###If you want to put it on the right site, mirror the standoff with your slicer!

#####All is designed to print without supports. Thats why the inside pushers that keep the board in place are printed separately. See instructions below.

**Please Like the thing as a reward for my work. **

This design is part of my compleet CR10 Rebuild where I got rid of the clumsy control box and messy wiring and give it the PRO looks and feel. Take a peek here:
https://www.thingiverse.com/thing:3772325

UPDATE: Added a T-Slot compatible version Standoff (Original is V-Slot)
UPDATE: Added a stand-off with an 40deg angle for a better view while standing

I have a whole series of these for al other screens. Have a peek at my things.

For the screen:
https://www.aliexpress.com/item/33044733169.html?spm=a2g0o.productlist.0.0.5bc34c44StVN7e&algo_pvid=b29287e7-79ed-4bfe-a400-b206bcf52824&algo_expid=b29287e7-79ed-4bfe-a400-b206bcf52824-2&btsid=0b0a050b15842822326241203e4ca3&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_