Riddler Trophy - Batman Arkham Asylum

Probably the most iconic game prop in the entire Batman Arkham franchise, when I saw the official version I desperately wanted one but they were expensive and hard to find.

Sometime later I got around to modeling the trophy and printing one and this is what I came up with. It may not be the best way to build one but it's how I got it done.

It was designed to use stripped elwire that runs through channels in the question mark. Theres a compartment underneath to store electronics and a pathway to route the cables from the compartment to the lamp holder. You can reference this short video I took a while back to see what I mean by stripping the elwire.

VIDEO: https://youtu.be/ahcQ8vJMmAA

RECOMMENDED MATERIALS:

El-Wire Green - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86
PLA Green - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86
PLA Silver - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86
Raise 3D Printer - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86
Soldering Kit - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86
Acrylic Paints - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86
Bob Smith Super Glue - https://www.amazon.com/gp/product/B07CM23QCP/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=anima3d0d-20&creative=9325&linkCode=as2&creativeASIN=B07CM23QCP&linkId=8679991e1f2a48bf5a063631895dfb86

Recommend printing high infill and perimeters for the base maybe 30% infill so its heavy and less prone to knocking over.

NOTE: Some aesthetic and minor improvements were made to the design since some of the photos were taken nothing major.