Dillon XL650 / XL750 Tool Head Hollder WALL MOUNT

These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well.

Works with the XL650/750 Tool heads.

I made the screw holes to work with the 50lb plastic anchors screws from homedepot or lowes. (E-Z Ancor #25350)

I'm using a 0.6 Nozzle and print time is about 3.5hrs per print. This is at a .3 layer height.

I only made the ones I needed, they are labeled on the front. If you need one for a caliber you don't have, let me know.

Print Settings:
I did these with the following, they are strong in my opion and I tugged on them just to check they wont fall;

Prusa Slicer
0.3 Layer Height
Gyroid Infill
15% Infill
0.6 Nozzle