AnyCubic Kossel Bed Clips

These are my newly designed bed clips for the Anycubic Kossel 20cm diameter bed.

With the chamfered lip of 2mm, it should hold the bed down and in place through multiple heatings and coolings (unlike the original bed clips), with minimal interference with the nozzle and print head.

You will need to print 6 of these, and:

6x M3 2020 T-Nuts
6x M3x10mm Hex Head Screws

HIGHLY Recommend printing these in PETG as PLA will soften and warp from the heat of the bed.