Arrma Infraction Drag Wing

Arrma Infraction Drag Wing

This is a WIP. I think the Infraction looks better with a drag style wing but there aren't any outside of custom aluminum ones that I wasn't really digging so decided to try and design my own. It's loosely based off of Ken Blocks Hoonitruck drag wing concept pics.

http://www.andyblackmoredesign.com/wp-content/uploads/hoonitruck8.jpg

Still trying to figure out how to attach the side wings but for now you can just glue them on. If you own an RC or 3D print.. you should have CA glue. I may update later depending on interest. Also you can either glue the bottom of the brace to the body or use a small piece of double sided tape. I included the strut brace but it's fragile so consider it cosmetic and prob won't last long bashing around. I'd use something made of metal or cf. I also flushed the mounting screws since the pics were taken.

updated: added a few extra designs for the side wings and deck that'll show up good with a filament swap. Logo was too small to see on the original wings but keeping model up.
Updated the deck to fit better by extending the deck wings to match profile of side wings, (you might need supports under the deck wing extensions) and added rivets

updated: modified rivets on deck to match side wing rivets. updated model but leaving the old pic until I get a chance to reprint it.

updated: added new deck designs. Autobot, Flames

Choose original deck and wing or v2 deck and v2 side wings, I wouldn't bother with the struts since they are just cosmetic but going ahead and leaving them. I may redesign them later or just fabricate some out of fiber or metal rods

I also can do custom models w/ your RC club name or whatever is doable on the top deck for a tip. msg if interested