.338 Lapua Ammo Box

*Quick update on the lid. I made a bit more clearance for the screws inside the lid. Sides were a little thin after printing and needed some room for latch to function better. New file is lid 3

Designed a ammo box for carrying .338 Lapua. Bullets are stored tip down and the box supports the shoulder of the ammo. Box is designed so even very long oal cartridges will fit. Modeled to look like a metal ammo can.
The handle is optional and does not need to be printed. If you choose to print the "handle and ends" (and links) then you will have to finish the holes in the lid with a drill. The holes are marked on the inside of the lid when printed.
The lid seal is optional and must be printed in TPU. Print settings should be 0.20 with 2 bottom and top layers (0.4 total) and a single perimeter wall with NO infill.