We are a Non-Profit-Initiative and our goal is to provide equipment where it is currently needed the most in order to prevent Covid19-infections.
Over 3000 thousend times printed.
Follow us on instagram @maskup_initiative
https://www.instagram.com/maskup_initiative/
Homepage:
https://maskup-initiative.de/
You own a 3D-printer and want to print faceshield for your own use?
+++++++++++++++commercial use is strictly forbidden++++++++++++++++++-----------------------New Update improved Version V5. 10.04.2020--------------------Needed prefabricated parts:
1 mount
1 clip
1 elastic rubber band (width at least 10mm/0,4“, length ca.30cm/12“)
1 overhead transparency sheet with rounded edges (thickness ca. 0,1mm/0,0039“)
Needed tools:
cutter knife
sand paper
scissors
Here you can purchase the needed materials*:
Overhead transparency:
dots OHP-Präsentationsfolien (S/W-Laser) - 100 Stk.
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
AVERY Zweckform 3555 Overhead-Folien - 100Stk.
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
Rubber band:
13m Gummiband 10-15-20 mm Breit Weiß
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
Gummiband Schwarz 10-15-20-mm Breit zum Nähen,
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
3D-Printing filament:
GEEETECH Filament PLA 1.75mm
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
PLA Plus Filament 1,75 mm 1KG
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
3D-Printing
Recommendation 3D-printing settings:
Each printer has his specific settings, so normally each single person
know in detail which settings are the best to get a good result.
If you have probems with sepperating the stacks, watch the Video below.
Wall number: 3
Layerhight: max. = 0,3 mm / 0,11811"
Infill: min. = 20% up to max. = 100% (the parts showing less Infill)
Speed: start slow with 40 mm/s and rise up until max. 100 mm/s
Used 3D-Printer:
Creality CR 10 V2
https://www.amazon.de/gp/product/B00IYX4092/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B00IYX4092&linkCode=as2&tag=muskup19-21&linkId=63c01f5977a25492513b05a241767973
Disinfect before use.
This is no medical prouct.
It is no official licensed product.
Developed following DIN EN 166
Use at your own risk.
No liability is accepted.
saoe
