Equate 34oz or Target 32oz Hand Sanitizer holder - Anti-theft Wall Mount Remix

Update 4/10/2020: There is a new and improved version at the link below. It uses a small pen spring and a penny (or other small coin) to unlock it: https://www.thingiverse.com/thing:4276185 I will not be updating this design unless somebody requests it. There are several improvements on the newer model linked above which this one does not have. Original Description: This is an anti-theft version of the wall mount for my "Equate 34oz or Target 32oz Hand Sanitizer holder - Wall Mount Remix" which you can find at the link below: https://www.thingiverse.com/thing:4213018/files This is just the wall mount, so you will need to print the base (which is the orange part in the pic which holds the bottle), from the model linked above. This is just designed to keep the bottle of (now difficult to get) hand sanitizer from walking away, but won't stop somebody with a screwdriver, or a destructive impulse. Still it may help at least stop a casual thief. This is designed to use 2x M3x20mm screws and 2x M3 nuts (although you could just install the screw on one side and use one screw+nut). I would recommend gluing the nut into the pocket so it does not drop out each time it is installed (gorilla glue clear or superglue gel would work well for that). There are 2 versions of the wall mount, they work the same, and the only difference that the wall mounting screws are hidden on the first one: Equate-Hani-Sani-32oz-7H-WM1-RETAINER.stl (wall mounting screws are hidden and requires flat head screws) Equate-Hani-Sani-32oz-7H-WM2-RETAINER.stl (wall mounting screws are exposed) Parts are not oriented for printing. STEP file is included for easy remixing. This is not tested, and I don't plan to test it at this time, so it will remain a work in progress. If you make one, please provide feedback (and post a make) so I can move this out of work in progress. Thanks!