Caracara - RC Glider / Motor glider

#Caracara - RC Glider / Motor glider

###Similar to the Crobe, but bigger (Wing span 930mm).
###Based on original design (balsa made) designed by Franck Aguerre, described here : http://lecrobe.free.fr - Look Caracara.zip

Requires :

• Two servos like Corona DS-939MG or HK939MG (HK clone)
• Lipo 1S 600mAh or bigger, 2S prefered with HV servos (glider)
• Motor 1806-2300Kv + 10A controller + 2S-450mAh + 6x3prop or similar setup
• Tiny 4ch receiver
• Main carbon rod diam. 4mm
• 2mm balsa for elevator
• Small parts (pvc tube 2/1mm, steel rod diam 1mm...)

##Print

• Around 150g of PLA+
• Printer height max 218mm (Part1_Glider), alternatively the glider fuselage can be done with Part1_Motorized + Nose for smaller printers.
• No support required, just some brim.
• Layer thickness 0.2mm - One 0.4mm wall (can be lowered to 0.36mm for part2/part3)
• Layer 0.12mm and line width 0.3mm for 'Light' versions of wings.
• 'flat' wing means without dihedral, like original balsa's Caracara.
• Hatch/lock : layer thickness 0.15mm, 2 perimeters = 0.8mm

##Weight

• Light wing : ~41g each wing
• Complete fuselage for pure glider : ~51g
• RTF weight : around 240g with motor and 2S -450mAh

##RC settings

• Delta mixer
• Elevator function: +/-6mm (measured at trailing edge / wing root)
• Aileron function: +/-4mm

##Updates

• 09/04/2020 : Initial upload (v0.1) - Work in progress
• 10/04/2020 : Small fix for third wing panel (Aile3xxx)
• 11/04/2020 : Maiden flight (Youtube video)
• 22/04/2020 : Added alternative printed stabilizer and prop hub with cone.
• 23/04/2020 : Added second hatch version with more support.
• 21/07/2020 : Added Part1_Motor and nose (v0.12) with pitch motor angle.