Face Shield Head Band - Prusa Modification

Prusa did all of the leg work. I mean all of it! Check out original here:
https://www.prusaprinters.org/prints/25857-prusa-face-shield

This has very minimal modifications to the Prusa shield.

• Removed Prusa Logo and Version number (Sorry Prusa! Taking up Unnecessary time on printer!)
• Removed chamfer in different areas (mostly for bed adhesion)
• Filled in some small artifacts located inside model.

There are 3 versions(Times printed with 0.6 nozzle, 0.4mm layer height.):

• Original 20mm Height - 2Hr
• 14mm Height - 1.4Hr print
• 14mm with a step down for shield mount - 1Hr Print!

The version with the step down is weaker than the others but still seems to hold fine. Experimenting with both.

Evolving WIP.