This is version 2 of my custom shell
Designed to use it with FrSky M7 Hall Sensor Gimbals and Crossfire Micro TX. The battery bay was modified to make use of 2 x 18650 cells. Rear shell can be printed with or without the cut-outs for a 2s USB charging balancing board.
- you need to modify the power button (cut to length)
- you remove the internal RF board! it's designed for the TBS corssfire micro module - the existing internal RF board needs to be cut (new org replacement is about $26 - see below)
- you remove the trim pods (never really used them, plug them once, trim and forget...)
M3 brass threaded inserts:
https://www.alibaba.com/product-detail/M3-brass-ultrasert-threaded-insert-nut_698749354.html
https://www.amazon.de/Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile-Ultraschall/dp/B07ZZHL4RY/ref=sr_1_7?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=threaded+inserts+m3&qid=1577617342&sr=8-7
RF replacement board:
https://www.horusrc.com/en/frsky-taranis-x9-lite-rf-board.html
2s USB charging balancing board:
https://www.modmaker.co.uk/Micro-USB-2S-Balance-Charger
For the battery holder i used the clips out of those holders:
https://www.amazon.de/dp/B07331B193/ref=cm_sw_em_r_mt_dp_U_LzGOEb419NC9E
Bodyfiller:
https://www.motipdupli.com/en/products/presto/styrene-reduced-putties/ipg-1098.html
Assembly video:
https://youtu.be/chSrdssZOE4
Sorry, the stock TX won’t fit in and don’t intend to modify this version for the stock TX
mosch_a
