Printrboard to SKR 1.3 Adapter

A simple adapter plate to mount an SKR 1.3 in place of a Printrboard. There are 2 versions. The "standard" has space to fit M3 threaded inserts to hold down the board. However, this probably isn't strictly needed, so if you don't have those you can print the "no inserts" version, and form threads in the plastic with bolts.

These are the inserts I used: https://www.amazon.com/gp/product/B01IYWTCWW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

This was designed to fit comfortably inside the bottom of a Printrbot Simple Metal, but should work with other models. Be advised that if you want to use the SKR 1.3, you will need to either enlarge or cut a new hole for the USB connector, as the full size type-B on tje SKR is much bigger than the standard micro-B the Printrboard had.