May 2, 2020
Description
A canopy for the DJI Caddx Vista to fit the beta95x whoop frame.
https://www.youtube.com/watch?v=qqcSJv3_zvM
Print in flexible TPU only.
Install the camera first, followed by wedging in the vista tx unit, and lastly inserting the antenna. Note the orientation of the vista tx unit so the antenna connects directly beneath it.
Weight is 5.5g
Get a Caddx Vista system from here LINK
Get the DJI HD FPV Goggles from here LINK
Print settings:
-0.4mm nozzle
-20mm/s print speed
-2 perimeters
-2 top/bottom layers
-50% infill
-3mm retract distance
-No supports required
License:
Creative Commons - Attribution - Non-Commercial
Tech2C
