Z Belt Tensioner / Z Riemenspanner - Artillery Sidewinder X1

Created this from a other tensioner and modified it strongly in design and my needings.

My Z-Belt (The Top Belt) of the Sidewinder came very loose and i had layer shift problems, therefore i created the tensioner and now the layer shift problems are gone! :-)

Tensioning:

Move the tensioner more to the left or right to get more tension, move it more to the middle to get a more loose belt.

You need to print:

Necessary:

• The Clamp
• The 44mm Gear

Optional:

• 3x 3mm Screws (You can print it or use three real ones)
• 3x M3 T-Nut you can use it, but you musn't
• 1x 5mm Screw (You can print it or use a real one)
• Bearing (You can use a metal one, but also without a bearing its working fine)

I've printed it in PLA with 0.15 resolution and Tree Support. I guess the support is needed but you can change the resolution to 0.3, i guess that should also working fine.

Feel free to use it and leave me a comment when you like it!