Summary

This is a recreation of the washing bucket for Anycubic Wash & Cure machine.

Printed Parts:
Stirrer
Stirrer Base
Container Leveling Pad (for DKS-100)

Item needed:
608 ZZ bearing
(4) 15x3mm magnet (Note 1)
Progressive Prepworks Flour Keeper DKS-100 (Note 2)

Let me know if you have any questions or comments. If you find this helpful, a cup of coffee would be appreciated :)

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Photon</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>

Post-Printing

I would fit in all the parts before curing the stirrer otherwise it becomes too brittle. If you are having trouble fitting the parts, consider printing at 101% scale.

Note 1: Use two magnets on each side, I tried one but it's not strong enough to spin at full speed with bucket fully loaded.

Note 2: This container DKS-100 leaks from the red side! You might consider getting the pro-version ProKeeper 4 qt. Flour Container PKS-100. I have not try the pro version, please let me know if it leaks or not. Any container works, but I can only find this model close matching the original dimension. You can insert the washing basket just fine.

https://progressiveintl.com/products/flour-keeper

https://progressiveintl.com/products/flour-prokeeper

Final assembly

Size comparison

Anycubic Wash & Cure

Anycubic Wash & Cure

Related Models