Bed Leveling Thumb wheels (Large - TronXY P802-E)

If you find this useful, please consider sending a tip. Thanks!
https://paypal.me/cdsmakestuff

New larger thumb wheel design for my TronXY P802E. (sure it could be used with other things/printers as well).

Appox. 30mm across x 10mm high

Designed to capture an M3 nut for bed leveling.

Suggest to print in PETG, ABS, or similar.

If using the original plexi frame that came in the kit (or other similar printer), the rear clearance slot needs to be enlarged to accommodate the size (see photo). I was able to cut this away using a small, fine tooth hand saw for hobby/craft work.

Can be printed with or without support in the nut capture recess. really depends on your printer capabilities.