Microphone camera stand screw adapter 5/8"-27 M to 1/4"-20 F

This adapter is meant to adapt the small 1/4"-20 screw of standards camera tripods to the bigger 5/8"-27 of most microphone holders.

A proper metal adapter would be better, but if you have no time and you need one, this will do the job.

To make everithing as stiff as possible I've increased the wall count to 7 to have a sort of "100% infill"
I've also applied an horizzontal expansion of -0.15 mm to have a smooth thread. This value proved to work with my printer, you have to find your, just be carefull not to force the adapter inside the microhpone holder!

[EDIT] I've added a new revision cutting two sides of the external screw in case you have trouble unscrewing it from the tripod.