Adimlab BMG & E3D V6 Setup for Linear Rails - Remix

This is a mount adapter to add a BMG style extruder and an E3D V6 style hotend to an Adimlab printer with linear rails.

This only includes the linear rail adapter and the backplate. Click on the following link to get the rest of the files and instructions. You won't need to print the belt mounting blocks from it.
"Adimlab BMG & E3D V6 Setup for Creality Style 3-Wheel Back Plate - Remix" https://www.thingiverse.com/thing:4314318

After printing glue the linear rails adapter onto the backplate. Be sure the screw holes are lined up by placing screws into at least two of the holes and using them as guide pins. Clamp and let the glue cure. Suggest using acrylic glue or a good super glue.

UPDATE: 3/26/21 Increased the size of the holes in the air duct to allow for a hexhead M3 screw to be placed through the air duct to mount the extruder.

UPDATE: 5/19/20 Uploaded a new version of the adapter plate that is slightly thickened and ensures the end-stop is engaged properly. Thanks to a member of the Adimlab Facebook group for testing this out!