Simple Loc-Line Inspired Camera Mount for 30mm Extrusions

This is designed to fit 30mm aluminum extrusions with 8mm slots such as what you find on most Prusa printers today.

All that is required besides a few segments of Loc-Line (11.8mm balls) is a single 10mm M4 bolt and a couple zip ties. A printable drop-in T-nut is included.

You can attach the mount to your frame with zip-ties, or a single M4 bolt and T-nut depending on your setup.

Any USB or Raspberry Pi camera can be attached with either zip-ties, large heatshrink tube, or double sided tape to the camera mount. You can also use any other loc-line camera mount you desire.

The models also feature holes on either end of the LocLine so you can run wires through them cleanly.