Tiny e-Lab Fusion 360 Template

This is a Fusion 360 project you can use as a starting point for your own Tiny e-Lab modules.

Tiny e-Lab: Here

These modules have an XT60 connector on each side, and this allows them to "click" together and share power. It's a pretty neat concept for a modular electronics workbench.

How to use

• Upload the F3D file in Fusion 360.
• Open the "Change Parameters" dialog in the project (it might be hidden under MODIFY on the toolbar).
• Set the moduleWidth parameter to the width you want your module to have.
• Adjust the ventCount parameter to the amount of vent holes you want. The appropriate amount depends on the width of the module.
• The module should have automatically updated to match the new parameter values.
• Make a sketch on the front-panel to fit whatever parts you want your module to have!

Assembly

See the attached animation. The two parts click together, and are then screwed together using two M3 screws. The screws must be between 5mm and 18mm in length.