May 17, 2020
Description
This is sturdy phone holder designed for a ~30mm diameter rod.
It fits phones with a width of 70mm to ~110mm.
Its design is based on KMA3d's mount.
Needed parts:
5 threaded inserts M4
4 screws M4x15
1 screw M4x30 or longer, depending on phone width.
Assembly of the slider:
Insert the threaded insert into the hole on top. Tighten a nut to the head of the screw to connect it to the knob. Use two nuts against each other between the slider and main part.
(I hope that makes sense)
License:
Creative Commons - Attribution
fipsthedog
