Dremel CNC - My version

Hello,

This is my version of Dremel CNC by Nikodem Bartnik, where I used pieces from Kone.

First of all, please remember to not start a Dremel CNC if you do not have :

• a 21mm hinge drill bit (for linear bearings)
• a 22mm hinge drill bit (for 608zz bearings)
• a tapping screw of 3mm, 5mm and 8mm
• some glue for the bearing.
• a few wood screws because normal M3 screws will not handle everything.

Please do NOT use larger X & Y axis for Dremel CNC because 12mm rod will bend very much. I did try a 1m x 1m one, it bends so much that I had to cut it to Nikodem's dimensions.

You will find :

• the 2 X axis mounts, which are not straight like in Nikodem's one, to avoid the spindle being to much on 1 side
• the 4 Y axis mounts, which are designed the same, with motors couplers outside of working area, 608zz bearing inserts and stronger handling
• the emergency stop integrated to the front right mount
• the TPU foot

Thanks to Nikodem & Kone for their work.