Dragon Ball Buu Bottom / 七龍珠普烏底座

https://www.youtube.com/watch?v=zB5Dc7nFPDw&feature=youtu.be

這次的作品是延續七龍珠系列，終於輪到胖胖的普烏登場，一直有在找這個檔案而作者終於發佈了，於是就下載來製作看看囉!看起來就不是很容易的作品，我在它底部加了底座方便站立。

列印過程不用太困難，因為都有小平面可以當底層，最困難的地方是上色，需要相當多的耐心來完成，而我在上色之前做了實驗，就是將表面打磨的細一點，所以作品製作時間變得比較長，最終結果還算滿意。

黏合過程需要一點小技巧，因為膠在還沒乾掉的時候物件會滑來滑去，需要靠一點地心引力以及小物件來輔助，普烏做完後真的滿可愛的，配上之前製作個OREO完美呈現普烏的個性!

This time the work is a continuation of the Dragon Ball series, and finally it is the turn of the chubby Buu. I have been looking for this file and the author has finally released it, so I downloaded it to make a look! It has a base at the bottom for easy standing.

The printing process does not need to be too difficult, because there are small planes that can be used as the bottom layer. The most difficult place is coloring, which requires a lot of patience to complete, and I did the experiment before coloring, which is to polish the surface thinner Therefore, the production time of the work has become longer, and the final result is quite satisfactory.

The bonding process needs a little skill, because the objects will slide around before the glue is dry, and it needs a little gravity and small objects to assist. Buu is really cute after making it. OREO perfectly presents Buu's personality!