May 29, 2020
Description
My Pendulum style rudder pedals with toe brakes.
https://www.youtube.com/watch?v=EgJyJjsJYyQ
Updated Files 7/10/23 @8:46PM
The recently updated cam files did not hold up as well as I would have liked, so....
Added new files: Main_Cam_v3.3mf, and Valkyrie Pedals F360 v4.f3d
Removed Main_Cam_Left_v2.stl, Main_Cam_Right_v2.stl, and main fusion file: Valkyrie_Pedals_F360_v3.f3d
Updated Files 7/8/23 @4:30PM
Removed old cam files, and main fusion file: Valkyrie_Pedals_F360_v2.f3d
Added new files: Main_Cam_Left_v2.stl and Main_Cam_Right_v2.stl
Updated Fusion 360 Project File: "Valkyrie Pedals F360 V3.f3d"
The main cams have been strengthened to accommodate more resistive elastic bands = stronger force to push pedals.
Updated Files 6/6/20 @7:44AM
Updated files: Left Arm.stl and Right Arm.stl -Shortened Arms by 1 inch for better action and less flex.
Updated file: Valkyrie Pedals F360 v2.f3d -updated with arm part changes.
Updated render photo to V2.
Added File 6/3/20 @7:53PM
Added Fusion 360 Project File: "Valkyrie Pedals F360 V1.f3d"
Removed part: Left Brake Cam,stl and Right Brake Cam.stl -Superseded by Left and right brake cam 10 degrees forward.stl, will rename part soon.
Added Parts 6/1/20 @9:55PM
Added Parts: Left Brake Cam 10 Degrees Forward.stl, Right Brake Cam 10 Degrees Forward.stl -Set the default brake pedal position 10 degrees closer to your foot.
Added\Updated and Removed 6/1/20 @7:28PM
Updated Parts: Left Arm.stl and Right Arm.stl -Beefed up arm to reduce flexing.
Updated Parts: Left Arm Pushrod Connector.stl, Right Arm Pushrod Connector.stl -Minor cosmetic change.
Added Parts: Left Bearing Spacer.stl, Right Bearing Spacer.stl, Main Spool.stl
Removed Parts:Left Bearing Retainer.stl and Right Bearing Retainer.stl -superseded by Main Spool and Bearing Spacer parts.
Updated ALL Parts (Yet Again) on 5/30/20 @ 1:30PM
Fixed all parts so they are at proper scale and not usable by Smurfs.
(After some testing from my younger cousin.) ;)
Updated Parts (Again) on 5/30/20 @ 12:07PM
Left_Brake_Cam.stl
Right_Brake_Cam.stl
Updated Parts on 5/30/20 @ 11:AM:
Left_Brake_Cam.stl
Right_Brake_Cam.stl
Additional hardware needed to complete this build.
Still updating the BOM list so be patient as of 5/29/20 @ PM
Bill of materials:
Filament
Around 1kg of filament. I used Prusament PETg
Machine Screws (Don't forget to include the nuts and washers!)
Type: #6-32
Length
3/4 QTY 4
3/8 QTY 6
2" QTY 8
3" QTY 4
1" 1/4 QTY 6
5/16 Hex Bolt:
Length:
5" QTY 2
2" QTY 1
Electronics
BU0836A Enclosure (Optional)
[
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=102&products_id=222
]
BU0836A 12-Bit Joystick Controller Board
[
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=94&products_id=204
]
Cable with 3 pin connector plug attached - 30cm ( 12in )
QTY 3
[
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=83&products_id=202
]
Hall Effect Rotary Sensors
QTY 3
[
https://www.digikey.com/products/en?keywords=6127V1A360L.5FS
]
Other
Pack of Staples rubber bands
Bearing
OLDBOY Skate Bearings QTY 8
https://www.amazon.com/gp/product/B078VKLKZQ/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
BL-Radial-Ball-Bearing-35JC82 QTY 4
https://www.grainger.com/product/BL-Radial-Ball-Bearing-35JC82
Aluminum Tube
Outer Dia 1'' Length 36'' (Typically sells in 36'' lengths.)
Invest in a decent pipe cutter, it will save you time and be very accurate.
https://www.homedepot.com/p/RIDGID-101-Tube-Cutter-1-4-in-to-1-1-8-in-40617/100075014
Wood
(Sells at Michaels or other craft\hobby stores, but you can substitute)
Dowels
Birch Ply
Birch Ply
Push-Rods
https://www.amazon.com/gp/product/B07L3Q8WXX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
hotpretzel
