Corner joint for wooden stake

This is a universal corner joint designed for 22x22mm wooden stakes. The kind used to mark out positions on building sites and such. Use the scale function to adjust for what ever size you have at hand.

I will use them to build a frame on top of a pallet collar filled with strawberries. The frame will be covered with chicken wire to keep the birds out. It will be light and easy to simply lift of for access. It could be covered in plastic to make a simple greenhouse as well.

To build the pallet collar frame for a standard 1200x800 pallet you will need:
4 stakes 1145 mm long.
5 stakes 751 mm long.
4 stakes 300 mm long.
28 screws 4x15mm.
8 printed Corners-3.
2 printed Corners-T.

Each printed piece needs 60g of plastic so the entire frame will use 600g.

I print these things laying down turned 45 degrees with 15% of zig-zag support. The open corner makes the support easy to pull out with some pliers.