100mm Caliper

I designed the calipers on tinkercad with 1mm increments. The 5mm spots are marked by longer lines and the tens are marked with single digits for the sake of reducing print time and detail (for example, 10 is marked 1, 20 is marked 2, etc). These are only for outside dimensions. The center of a dash is actual unit, dashes are 0.5mm wide. This means that (while holding the caliper in your right hand, numbers up) if you line up the slide with the left edge of the 10mm dash you will actually be measuring 9.75mm, the center of that dash will be 10mm, and the right edge of the dash is 10.25mm. They aren't going to be as precise as a nice store bought brand but they should work well for a quick reference tool when you are trying to find a bolt size or something similar.

please note that i have not tested these yet. if you print one before i do please leave a comment about any changes you would like to see