Mount for Pi Zero on Adafruit 3,5" TFT Touch Display

This is a simple mount or brace for a Pi Zero on the back of the 3,5" TFT from Adafruit.
As seen in the pictures it´s made to use M2,5 screws for the screen and the board is held in place by slightly larger screws for plastic.

Really sturdy when mounted but it will cover some of the surrounding area around CPU so heat dissipation will be restricted.
This was made for a situation where very little performance is needed but if you plan on working the Pi hard you might need a heatsink or fan.

The screwholes will need to be drilled out with 2.5mm drillbit after printing.