RC Mini Twin Jet Boat - Test Print

Download all other parts of the boat on Cults3d

Boat Size without Stator and Nozzle 200x80x50mm

For beginners, i recommend to start with RC Mini Single Jet Boat
Take this model, if you only need the Water Jet Drive
Take this model, if you want a RC controlled Mini Single Jet Boat

Video:

• 3D printed RC Twin JET Boat
• 3D printed RC JET Boat with JET Drive - Testing
• 3D printed RC JET Boat with JET Drive - Assembly
• How to Replace Brushless Motor Shaft

Parts:

• 6x screw headless M2x3mm (propeller)
• 6x screw inbus M2x8mm (3x jet nozzle, 1x oil)
• 12x screw inbus M2x6mm (4x cover, 4x electronic, 4x motor)
• 8x insert M2x3mm heating brass insert, 4x cover, 2x electronic mount
• 1x seal Moosgummi Foam rubber cord 2x200mm
• 2x battery 18650 3400mah 3.7V or 18350 1500mah 3.7V
• 1x balancing cable 500 mm RC Servo cable
• 2x drive Littlebee 20A ESC
• 1x drive Recom R-785.0-0.5
• 2x drive motor DYS BE1806 2300KV or 4 pcs Motor other motors also possible, diameter max. 23mm, length ca. 18mm, screws 16mm
• 2x drive longer motor shaft 2x30mm
• 2x drive rod 2x100mm
• 2x drive shaft coupling, motor 2mm to rod 2mm
• 4x drive Brass bearing 52B 2.05x5x2.4mm, OD 5mm or MR25ZZ (4.50€)
• 1x drive jet bearing, brass tube OD 3mm, ID 2mm (drive rod Length 3mm)
• 1x Battery Lipo Charger iMAX B6 charger (optional)

My RC Controller

• 1x Transmitter FrSky Taranis X9D Plus 2.4G
• 1x Receiver Mini Frsky D8 2.4G 4CH

Discover my other jtronics designs

• Website: http://www.jtronics.de/
• Instagram: https://www.instagram.com/jtronics.de/
• Youtube: https://www.youtube.com/jtronicsTV
• Twitter: https://twitter.com/jtronics2
• Facebook: https://www.facebook.com/jtronics.de/