June 12, 2020
Description
I compiled a couple fan options from other users, added some modified versions of those, and designed a mount for the Dyze Pro hotend and extruder. This mount is 4mm thick and is offered with and without BL Touch. Some of the fan mounts have BL Touch mounts as well, so make sure you read the file name to verify you have the part you want. I printed the prototype mount with a 0.4mm nozzle at 0.2mm layer height and the holes for the eccentric nuts are about 0.25mm smaller than they are supposed to be, the holes for the other wheels are 0.1 to 0.15 smaller, and the small holes are all about 0.1mm smaller than they should be. i don't know if i can correct this by printing in finer detail or if i need to enlarge the holes to compensate for shrinkage. I'll work on it as i have time and post updates when i can.
6/23/20 I have enlarged the holes in Tinkercad but have not printed the new mount to get measurements yet. I have gotten the BLTouch base and modified fan mount lined up. It's set up for the GDSTime 50mm fan, they were the cheapest ones on ebay/amazon
10/28/20 I have the mount almost finished. right now the issue is that the BLtouch mount is too low to use with the Geetech model that has a metal probe. If you are not using touch then this current model is ready to use. I printed this model in ABS and mounted it on my machine using the wheels/spacers from my Enomaker direct drive mount. It's very sturdy and did not warp or bend in a 45C enclosure. The file "newfan" is the newest model of side mounted fan, it is sturdier but has not been cleaned up yet and is still blocky. NOTE in the most recent file upload the touch mount has been moved up and SHOULD clear the nozzle but I have not printed it to verify yet. The file "dblfanwtouch" is a stretched version of the original, as i had problems with the vents touching the heater block. This version is untested.
11/9/20 update : I have modified a base (with and without bltouch) to work with a modified version of the bullseye hotend fan and the zephyr v2 cooling fan. the 4 files that work together start with "bull". I would love to tag these individuals but the function is not currently working so i will and links to their parts below.
License:
Creative Commons - Attribution
Antwon_Fukwon
