Ender 3 V2 screen stand

I design very simple screen stand for the new Ender 3 V2
No additional screw or tool required

UPDATE :
I redesign full stand ( not tested yet let me know in the comment if it fit or not )
no more screw or glue just print it and ready to plug the screen into it
so if you want to waste more material go and download stl file
and i upload picture how you can print it with minimum support needed

FOR WHO want save material and print just one side and glue to the other one that come with printer CONTINUE the followed steps :

you will need Glue gun ( which is available and easy to remove )
Steps :
1- print the stl file
2- unscrew the screen and mount from printer
3- keep one of the screw that all what we need
4- assembly the mount and the part that you print ( hand tight )
5- make sure there is no gab between stand and mount ( from the side )
6- put gun glue in the bottom (4 corner to avoid slipping ) and you adjust it to be like balance to the ground
7- put some gun glue between the stand and the mount ( from inside )
8 - now put the screen and connect cable back

I post some picture for the steps and how you should print it
and yes you should print with support