CNC Handwheel Handrad Estlcam Remote control

This is my Estlcam handwheel housing. This housing is easy to print, requires just a few M3 countersunk screws, cylinder screws and nuts to hold everything in place.

It consists out of 4 printed parts. All of them are easy to print and doesn't require support. There are two versions for bottom part available. One will give more space inside the remote but needs a well optimized printer which is capable to print wide bridges. Or print the simple version

The plate which holds the switches and jog wheel can be easily replaced by any kind of plate. So this housing will be a good choice for any kind of remote control of machines or robots.

I used this buttons and jog wheel:

https://de.aliexpress.com/item/32870414891.html?spm=a2g0s.9042311.0.0.44864c4dXGKpJc
https://de.aliexpress.com/item/32956631402.html?spm=a2g0s.9042311.0.0.44864c4dXGKpJc

My CNC mill runs with Estlcam shield for Arduino Mega provided by Arduinoclub. Instructions about how to build handwheel can be found at https://www.arduinoclub.de/2019/02/11/estlcam-steuerkarte-mit-arduino-mega-und-handsteuerung/