June 18, 2020
Description
Basic tripod for the raspberry camera V2. Uses M3 hardware for the tripod and 2.5mm screws to mount the camera to the tripod.
Should print without supports, but depending on your printer you may need them for the part called center.stl.
Some parts will need to be rotated in your slicer, knob.stl needs to be printed with the smooth section down to print without support.
Added 2 extra camera mounts with places to mount 10mm strip leds
I tested with .1mm layer height and 25% infil, with 3 perimeters but should work with any settings
License:
Creative Commons - Attribution
KUZTM_3D
