Da Vinci Pro Extruder Fan support

Remix of Da Vinci Pro Extruder Fan support by shotgun_banjo. All credit goes to shotgun_banjo. Excellent design and project. I had trouble getting the long arm attachment to print with enough strength so I cut it in to 3 pieces and glued it together. I redrew and extruded it because when I sliced the original I cut up it came out with holes. Print all 3 pieces flat for added strength. These parts will take a lot of heat over time and you will want to print with a high infill.

Instead of using screws and bolts, I assembled with zip ties. The electric consisted of a 2 pole on off switch and 110 ac plug converter to 12v DC. Fans were wired in parallel. The results using the fans are a big improvement! All credits to shotgun_banjo - what an excellent project that makes a huge improvement!