Salt Dispenser

I designed this so I could get a pinch of salt while cooking.
I printed the v3 Cura file, but I had a problem with a trapped support in the lid section.
I uploaded a v5 stl file with the lid in the fully open position, which should get around this problem. In the v3 file the lid doesn't open to it's full extent.
Print this with it's longest axis vertical on your printer to minimise supports.
Print with raft and supports.
I also uploaded my Fusion360 file in case you want to modify it. It's a parametric drawing. Look in "fx User Parameters" in the modify tools. You can easily change width, height, depth,
wall thickness, and clearance. Clearance is the gap between the various shells and at the bearings.
It all prints in one piece and the lid can't be removed. It's a shape that could only be 3d printed.