UV Lure Turner

This is just a quick project for a UV lure turner. It uses a cheap toolbox from a hardware store and some EMT conduit. You can also use a small "UV led" light strip to line the box if you can find one that is actual UV or something close to it. They are mostly blacklight strips but they seem to work well so far.

I mount the rotisserie motor onto the toolbox with supplied screws and then print off the retainer piece for the inside of the box. Then I cut the correct length EMT conduit and print off the parts needed.

For this design I included both the glue in option for the arms and the grub screw design which is modeled to work with M3 bolts and fasteners. The M3 bolt is recessed into the arms and glued in so you can torque the bolts to hold the arms to the EMT. The files are labeled accordingly, print whichever you choose to use.

I have a video going over the design and implementation of the box if you are interested:
https://youtu.be/vtBj-4faW0c

Pats used:
(Non-affiliated links)
$7 USD toolbox:
https://www.menards.com/main/tools/tool-storage/tool-boxes/tool-shop-reg-22-tool-box-with-tray/83502/p-1532586495746-c-1526043700147.htm

$15 led strip:
https://tinyurl.com/y7x9ahc9

UV epoxy used in this video:
https://tinyurl.com/y72zfm4s

Onlyfire Universal Grill Electric Replacement Rotisserie Motor
https://tinyurl.com/ybzph6pq