MMU2S PTFE Tube Guide

I've been struggling getting the MMU2S to work properly. Too much drag in the system, I believe. The original buffer was a pain to use, so I decided to simply hold the PTFE tubes at the back of the lack enclosure lid. I'll figure something else out to replace the buffer. Such as the rewind spool holders that people have put on here.

I printed off the upgraded PTFE holder by vertigo235 here:
https://www.thingiverse.com/thing:3233579

It worked wonderfully to hold the PTFE tubes in the MMU2S, so I thought I'd make a similar thing for the other end. And fortunately the pass-through tube fittings that I bought off Amazon came in a pack of 10, so I still had 5 to use.

This fits:
5x PC4-M10 fittings
2x 10-12x3/4 screws (leftover from the Lack Enclosure build).