Summary

You can screw nozzles to this board for easy storing and they won't fall off easily.

IMPORTANT: Cool down he nozzles beforre screwing them to the board,.

There are numbers on top of each line: 1 for 0.1, 2 for 0.2 and so on, (0.4 is very common, so I left 2 rows, and I also use a lot of 1.0 nozzles, but you could use the last row for special ones)

For teachers: this board also allows to check what nozzes are missing quickly before and after class, and you can add a label to each board if you have several printers, that way yo know as well what student was using which kit.

Print Settings

Printer:

CD-10 5S

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                    <strong>Filament:</strong> Matchbox PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I set medium quality on Simplify 3D.<br>Bed: 60°C<br>Extruder: 210°C<br>Fan: 0% on the 1st layer, 100% for the rest<br>Retraction 5.0 mm<br>Retraction speed 1800mm/s (max speed)<br>Top &amp; bottom layers: 3<br>Perimeter shells: 2<br>Print Base with hair spray<br>(also works with masking tape, but I find it more difficult to remove)</p></div>

Nozzle board

Nozzle board

Related Models