Gloomhaven Jaws of the Lion Organizer (+original Gloomhaven enhancements)

Plastic bags have their place, this isn't it. I've come up with a full storage solution for Jaws of the Lion. I started with some remixes of some excellent character and monster boxes and just kind of went from there.

As indicated in the photos, there is 30mm of lid lift with this solution.

Also including a deeper (more than the source Tinker box) version of the character boxes that should hold all sleeved cards from Jaws of the Lion.

When using Mayday premium sleeves, use the "+2mm" box for the Tinkerer and Diviner and use the "+4mm" box for all Jaws of the Lion Characters as well as "Saw" in the original game.

Print one of each card holder along with "Token Box 1" and "Standee Box" with their lids.

Token Box 1 (red box in the photos) contains the damage and enhancement tokens, I use Gloomhaven Helper so that box goes under the minis, if you use those tokens, go ahead and place the box on top of the minis.

If you plan to stick with the base games cardboard tokens, print one copy of "Token Box 2" and the matching lid. if you intend to use 3D printed tokens, see the update below.

Update 2020-07-17: Updated to support a full set (for now) of 3D printed terrain (see last photo).
Renamed Standee box to "Standee Box - Tall", included new 1/2 height version that will also be used to hold coins.
Added new "Token Box 2 - 3 chamber" to hold terrain.
Terrain pictured:
Jaws of the Lion Destruction Tokens by VirtuallyJason
Poison Gas Trap for Gloomhaven by Robagon
Gloomhaven traps by Flounder 1664 (just the bear traps)

A spacer made of closed cell foam beside the deck holders is optional.

I'm also including a 2-part hatchet token, build plate supports are required for the handle. I printed 3 handles and then 3 heads, I worked them all with needle files and my Dremel and ended up printing 3 more heads. I managed to get 2 good tokens. This is not a "print and go" token.

For the monster boxes, I widened the card holder to accommodate my Mayday sleeves. Even then, three boxes didn't have a deep enough well for all of the cards so I removed the bridge from the boxes.

The original "thing" for the labels (https://www.thingiverse.com/thing:3013163) has the rest of the labels, and the original "thing" for that has the lids (https://www.thingiverse.com/thing:2797796).

Details for Monster Boxes:
Jaws of the Lion:
Boss: 4,0
Black Sludge: 3,6
Chaos Demon: 3,6
Giant Viper: 3,10 - No Bridge
Imp: 4,10 (Holds Black and Forest Imps, 1 Stat Card, Other Stat card in the lid)
Living Corpse: 3,6
Living Spirit: 3,6
Mostrosity: 4,10
Stone Golem: 3,6
Vermling Raider: 3,6 - No Bridge
Vermling Scout: 3,10
Zealot: 3,6 - No Bridge

Forgotten Circles:
Aesther Scout: 3,6 (this box is optional, has no cards)

Explanation (https://www.thingiverse.com/thing:2797796)
First number = Base Size, Second Number = Lid Top Number

From Amnaroth in the comments:
If you're using the TITAN SUPER SLEEVES, the boxes for the characters won't fit your cards. Both the standard +2mm version and the larger +4mm version won't work. I used the larger +4mm version and scaled it up in height to 106%. The boxed need to be at least 26,5mm tall after printing.