Babu Frik - Star Wars: The Rise of Skywalker

THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES

NOTE: I NO LONGER USE THINGIVERSE - FOR SUPPORT, PLEASE CONTACT ME VIA PRINTABLES: https://www.printables.com/social/242618-magnavis/about

---

Magnavis - @Magnavis_

www.magnavis.co.uk

if you'd like to show some support for the 3D files I provide, you can 'buy me a coffee' here: https://ko-fi.com/magnavis_3d

---

This is my Babu Frik from Star Wars - The Rise of Skywalker.

This has been designed with resin printing in mind, though I'm sure it can be printed on an fdm machine.

All parts fit on the Elegoo Mars at 100% scale (and similarly sized machines) - with the exception of Babu-Frik-Head, and of course the stand. There is an A+B version (Head split in two) for printing on the Mars.

At full scale, he stands at around 22cm tall without the stand, and around 25 with the stand. The stand diameter is 17cm.

I have test printed the helmet connections at 50% and 70%. Everything has been test sliced and hollowed in Chitubox prior to uploading to make sure everything works ok.

You will need to hollow out these models for resin printing yourself

I would recommend printing the following pieces solid:

• Eyebrows L+R
• Whiskers L+R
• Helmet-Visor
• Arm-R-ToolTip

I have not test printed all of the parts - only a few that I felt needed to be checked. Everything else is simple plugs, so there shouldn't be any drama there.

If there are any problems, please let me know, and I'll do my best to help. I wont' be making any 'major' changes to the model though.

---

This model has been provided free of charge. I do not give permission for anyone to sell the files, or prints directly from the files. Please respect that.