July 4, 2020
Description
This is a experimental frame that I've been working on for a bit. It consists of 3d printed parts, 2mm carbon fiber rods, and optional machined plates. If supports a 16x16 stack, 9mm motor mounting pattern, nano (14x14) camera, micro axii antenna, and has ample room for RX, capacitor, and any additional components. Default propellers are 3", but rods can be extended or shortened to make a larger or smaller frame. A fully detailed writeup can be found here https://rotorbuilds.com/build/23619.
License:
Creative Commons - Attribution - Non-Commercial
craftedkwads
