S-120-12 Power Supply Switch Box

This is a switch / plug box for S-120-12 power supplies. It may fit others but who knows! It's designed to use a common type of power socket with fuse switch which can be found online just about anywhere (photo included). It also uses XT60 type plugs which are also readily available online (photo included). Optional M4 heat press thread inserts may also be used.

Included are four versions: two with/without back a piece and two with/without heat press thead insert hole vs M4 screw fit.

You'll also need 2 M4x16 screws and 2-3 M3x5 screws.

The switch is installed using 2 4Mx16 screw with or without thread inserts depending on what version you make. The XT60 plugs press fit in. If you're worried about the plus slipping loose the use a dab of superglue on them.

Print without supports, unless your bridging kung fu is bad.