July 11, 2020
Description
Yet another Extruder Rotation Visualizer / refrigerator magnet. I remixed this from Garble(Andrew Diehl) Absolutely Fantastic "HHGTTG Don't Panic" design. Made several small changes scaling for size, Target for magnet (8mm x 3mm found 2 worked better than 1) on back of body and removed the tab.
I scaled the design to fit Prusa printers with and without the Slanted Fan. The larger 88% scaled designed I printed and is shown in the photos of my MK3( non slanted fan)
The smaller 56% scaled design I have not printed but I'm confident will work on slanted fan printers like the MK3S. But someone will need to test it.
PRINTING TIPS - I printed the body up to the top of the teeth slot and pause the printer. Then glued in the teeth and continue printing. This way you don't have to struggle to get the support out. Also be very careful removing the support from the tongue I broke the first one I printed.
If you print ether please post a make.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
TinkerWest
