• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Image 1
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Image 2
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Image 3
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Image 4
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Image 5
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Image 6
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Thumbnail 1
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Thumbnail 2
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Thumbnail 3
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Thumbnail 4
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Thumbnail 5
RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi 3D Printer File Thumbnail 6

RackPi PowerSupply Unit 19" 2U for 7x Raspberry Pi

ReWOOrk avatarReWOOrk

July 13, 2020

thingiverse-icon
DescriptionCommentsTags

Description

Power Supply Unit to extend the RackPi shield by SliderBOR
https://www.thingiverse.com/thing:3022136

I've decided to simplify the power connections of my Pi's and to cut the need for single external power supplies. With this Power Supply Unit you'll be able to provide the power for up to 7 Pi's. It has one power cord to connect the main voltage with a main power switch and every single Pi can be powered separately with the single small switches.

I've no documentation about the self-made electrical circuit to distribute the power, but it’s quite simple: the input power (+) is connected to one connector of each of the 7 switches (via pin header and jumper wire). The other connector of the switch has a connection to one pin of the screw terminal (again with an jumper wire) and also a connection (with resistor in row) to the LED. The ground connection (-) is terminated on another pin header and the LEDs and the second pins of the screw connectors are terminated there. You can now easily connect a Micro USB Cable at the screw connectors to power your Pi’s with 5V. Switch off/on – that’s it. The green indicator light at the front shows you the active switches.

List of materials and links:

  • 7x LED 3mm green
  • 7x 1,5K ohm resistor
  • 7x Power Switch (small)
  • 1x Power Switch (large)
  • 1x Power Supply 50W 5V
  • 7x Micro USB Cables
  • 8x Screw terminals
  • Jumper Wires
  • Solderable pin header
  • 1x ciruit board
  • screws and nuts
  • 1x Power cord

Example Links for the materials:
LED 3mm green
https://www.reichelt.de/led-3-mm-bedrahtet-gruen-3-2-mcd-60-led-3mm-2ma-gn-p21624.html?&trstct=lsbght_sldr::21626
1,5K ohm resistor
https://www.reichelt.de/widerstand-metallschicht-1-5-kohm-axial-0-4-w-1-vis-c1501fc100-p237121.html?&trstct=pos_1
Power Switch (small)
https://de.aliexpress.com/item/10-teile-los-KCD1-15-10mm-2PIN-Boot-Rocker-Switch-SPST-Snap-in-auf-off-Micro/32880358926.html?spm=a2g0s.9042311.0.0.84f34c4dpXjMnl
Power Switch (large)
https://de.aliexpress.com/item/Latching-Rocker-Switch-Power-Switch-I-O-4-Pins-With-Light-16A-250VAC-20A-125VAC-KCD4/32829575455.html?spm=a2g0s.9042311.0.0.84f34c4dpXjMnl
Power Supply 50W 5V
https://www.reichelt.de/schaltnetzteil-geschlossen-50-w-5-v-10-a-mw-lrs-50-5-p202960.html?&trstct=pos_49
Micro USB Cables
https://www.reichelt.de/micro-usb-b-freie-enden-1-8-m-sw-musb-10080100-p198956.html?&trstct=pos_2
Screw terminals
https://www.reichelt.de/loetbare-schraubklemme-2-pol-rm-5-mm-90-rnd-205-00045-p170233.html?&trstct=pos_1
Jumper Wires
https://de.aliexpress.com/item/40pcs-lot-10cm-40P-2-54mm-dupont-cable-jumper-wire-dupont-line-female-to-female-dupont/32675262586.html?spm=a2g0s.9042311.0.0.84f34c4dpXjMnl
Solderable pin header
https://de.aliexpress.com/item/10-ST-CKE-40Pin-1x40-P-M-nnlichen-Zerbrechliche-Stiftleiste-Streifen-2-54mm-Lang-Blau-Rot/32863408765.html?spm=a2g0s.9042311.0.0.84f34c4dpXjMnl
Ciruit board
https://de.aliexpress.com/item/10-st-cke-5x7-cm-5-7-neue-Prototyp-Papier-Kupfer-PCB-Universal-Experiment-Matrix-Circuit/32853188386.html?spm=a2g0s.9042311.0.0.27424c4dCzOgPU
screws and nuts
https://www.reichelt.de/flach-senkkopfschrauben-schlitz-m2-16-mm-ssk-m2x16-200-p65729.html?&trstct=pos_0
https://de.aliexpress.com/item/100-pcs-lot-DIN934-edelstahl-hexagon-muttern-metric-gewinde-hex-mutter-SUS304-M1-M1-2-M1/1000005379037.html?spm=a2g0s.9042311.0.0.84f34c4dpXjMnl

License:

Creative Commons - Attribution - Non-Commercial

Related Models

RackPi Raspberry Pi (2B / 3B / 3B+ / 4B) Rack Shield 19" 2U with OLED & Power Switch preview image

RackPi Raspberry Pi (2B / 3B / 3B+ / 4B) Rack Shield 19" 2U with OLED & Power Switch

SliderBOR profile image

SliderBOR

1,776

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP ! preview image

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

Nautilus Forge profile image

Nautilus Forge

936

10-inch Rack-Mount Passthrough Blank preview image

10-inch Rack-Mount Passthrough Blank

Mauker profile image

Mauker

6

Raspberry Pi 4/5 2U rack-mount bracket preview image

Raspberry Pi 4/5 2U rack-mount bracket

russross profile image

russross

1,268

Microlab - Mini Modular Home Server Rack preview image

Microlab - Mini Modular Home Server Rack

CB4D profile image

CB4D

912

Modular 10" Server Rack preview image

Modular 10" Server Rack

Benjamin Kott profile image

Benjamin Kott

4,513

6" Rack, Raspberry Pi 3 Model B preview image

6" Rack, Raspberry Pi 3 Model B

KronBjorn profile image

KronBjorn

1,189

3D printable rack | 10-inch and 6-inch preview image

3D printable rack | 10-inch and 6-inch

Maurício Pessoa profile image

Maurício Pessoa

673