Johnny 5 Head with SAINT Parts + Upgrades

My added SAINT files are provided under ATTRIBUTION/NONCOMMERCIAL LICENSE. Which means you must credit me and cannot profit off them.

These are all my modded parts for the Ceive/Waterhouse123 figure (listed under the Remixed From section below). The SAINT Prototype add-on parts are for Waterhouse123's Johnny Five head, meant to go on Ceive's figure body.
I've reuploaded the complete set of parts here: https://www.printables.com/model/143395-johnny-five-figure-with-saint-parts-mods

I modeled these head parts with 152% scaling in mind, which makes Waterhouse123's head roughly one sixth scale. However I maintained Waterhouse123's original smaller scaling in the files for consistency, so that all files match together. However if you print them smaller than 152% they may not be thick enough, up to you! These are tiny parts.
Having printed this figure out now, the head seemed slightly oversized for the body at equal scaling. I ended up reprinting some parts. With the head at 152%, I think ~160% scaling is better for the body it's attached to.

Also added: Versions of the treads and lower abdomen that I split for ease of printing. More accurate laser parts (still compatible with Ceive's original arm). Alternate eyebrows for J5 base head that are easier to permanently glue in place.

The rest of the files needed for the figure can be found on Ceive's original listing.

(Occasionally I update my files to be better. I always increase the version number on each file when I update them, so if you want to know if you have the most recent update, just check the file numbers.)

The top SAINT eyebrows are fused for simplicity, and should actually be glued to the pointed tips of the SAINT "hat." (This makes attaching them easier) Mind the proper angles.
The SAINT faceplate and mouth guard come in two pieces, a tiny dab of glue will hold the mouth guard onto the back of the plate.

Paints I used: I started with a basic grey primer covered by MTN PRO Stainless Steel spray. Montana Metallic Ice Blue spray is used for the blues. FolkArt Gold Treasure paint for the golds. Jacquard Burnt Orange on the neck. Tamiya Flat Metal Grey XF56 for the general darks. Vallejo 72.095 Ice Blue inside the J5 eyes. Tamiya X-7 Red for the SAINT eyes. Tamiya XF85 Rubber Black for the extra dark parts of the treads.