Do you have a 1990 NA Miata?

Do you want to put a removable steering wheel hub on it?

This part replaces the "Clockspring" wire mechanism that connects the airbag and horn wiring to the old steering wheel.

Additional parts:

• You'll need a little piece of brass, bent to form a wiper. I used K&S Precision Metals #8240 0.032x1/4" brass strip. Commonly available in US hardware stores.
• A #4 (3mm) wood screw to attach the wiper.
• A 3.3Ohm resistor to delete the airbag and silence the dash light.

General instructions:

• Remove the clockspring mechanism, wiring harness and all.
• Cut the wire leads into and out of the clockspring flush with the mechanism
• Rewire them back together.
• Bridge the airbag wires with the 3.3Ohm resistor
• Zip-tie the new wiring harness onto the adapter.
• Cut and bend the brass spring. See pictures.
• Assemble your detachable hub, checking the wiring and contacts as you go.

Good luck!