Anet A8 Fan Duct Spaceship with increased length and thickness of the nozzle

Over the years of using this model, I have printed again many times, because it often deteriorates and deforms from temperature. First of all, the places closest to the extruder are deformed. So I increased the thickness of the walls of the nozzle and made a stiffener inside it. I also made it 3 mm longer. And to avoid overheating in certain places (I usually have it on the right side near the heater cable) and deformation, I additionally pasted over the part with thick aluminum tape to reflect heat and distribute it over the entire surface of the part.